How do Toronto movers safely lift a piano onto the cart?

Moving a piano by movers in Toronto is simple, but one mistake can cause significant damage because the item is delicate. An 8 inch piano weighing around 900 lbs is heavy to transport because the ground and gravity are also against you.

As heavy as it is, there are easier ways to move the piano, such as placing it on a cart. You can balance it on the cart on its feet or place it on one of its sides. Balancing the piano correctly ensures a good distribution of its weight, which facilitates its movement and takes the piano Toronto movers less time.

Toronto movers moving piano safely

1. Move the piano

The most accessible place to move a piano is on level ground, but movers in Toronto know how to maneuver on surfaces that are not level. Transportation is made easy by placing the piano on a cart and moving it effortlessly up the stairs or over long distances.

You will need three people to push it onto the ramp truck due to the weight. When you push the instrument onto a cart on a slope, most of the weight is on the lower side, and this is the part that needs a lot of attention.

2. Raise the piano

Before moving the piano, Toronto movers recommend that you first unscrew the music stand and remove it. Make sure to keep it secure with the screws to screw it back on once you get to your destination. The front legs of the piano are delicate and can break during movement. Put them off.

Have two men hold the piano, each at the sides of the piano, and the third at the front, ready to push the cart underneath to place the piano. To lift the instrument safely and effortlessly, men should carry it by grasping it by the handles and the other hand on the keyboard.

The two men are also the ones lifting it 8 to 12 inches off the ground, while the third in the front pushes the cart into position for placement. The two men lifting the piano then gently place it on the rubber caps of the cart.

The rubber trolley caps should be parallel to the wooden arms of the piano. Make sure the rubber on the cart handles is in place. This reduces the risk of unexpected piano accidents, injuring those behind and causing significant damage to the piano.

3. Tip a piano

The first steps of tilting and lifting the piano to move it are similar. When tilting, first unscrew the music stand and remove it. Keep the screws in a safe place to turn the music stand upside down when you are finished moving the instrument. The front legs are delicate and must also be removed.

Have two people lift one side of the piano about an inch high and place a cushion at the bottom of one side. While this is happening, the third person should put a lined cushion under the raised piano. You can also use a blanket.

Now drop the raised side of the instrument onto the pad. The cushion protects the edges of the piano and the floor from scratches when you place a cart underneath. The person standing on the padded side should then straighten the piano by placing one foot against its side. This is done to prevent the piano from slipping.

Two people should stand at the other end of the piano, grab the piano by its handle and under the keyboard, and tip it over. The man who sets up the piano must continue lest he slip on the carpet. If you haven’t removed the front legs, make sure that no weight is put on them.

4. Tilt the piano on its side

While one person lifts the piano to one side, another should align the flush to the side and make sure the two rubber caps are in contact with the side of the piano. Make sure the edge of the carriage touches the pad.

Move the piano to the cart by gently rocking it up and down. Don’t stop fighting. Do this until the piano reaches the cart. Again, no weight should be placed on the side of the front legs as this could compromise the balance.

The man who assembles the piano will perform several tasks by chocking the cart to place it under the piano. It is essential to hire experienced movers in Toronto so that they can take care of your instrument during the entire process, from unloading to unloading.